Node not Joining

I have a Node that has a good signal when trying to JOIN: SNR:5.3 RSSI:-103
I only got this problem when i added this node to the V3 console, before it was working like a clock.

Heres the message i get on the console:

I have no idea what to think of this, any thoughs.

I don’t think you have a good signal according to the LoR docs:
image

An RSSI of -103 is a very bad signal.
I think your node doesn’t receive the Join Accept message, because TTN V3 accepts the Join request without error message.

What WisDuo module are you using?
What region are you using?
Can you get closer to the gateway or improve the antenna of your node?

Thank you for the reply.
Well true the signal good be better, but due to the location i cannot move my node. it needs to be there.
How can you tell that there wasn´t any error message?

What WisDuo module are you using? RAK811 only
What region are you using? EU868
Can you get closer to the gateway or improve the antenna of your node? Unfortunatly no

(1) The server receives the Join Request (not in the log you shared)
(2) The server accepts the Join Request at 11:47:15
(3) The server processes the Join Request in the lines from 11:47:15 to 11:47:17
(4) The server forwards the Join Accept to the Gateway at 11:47:17
image

Do you have access to the gateway?
Next step would be to check the log file of the gateway.

Hi @bioshock2k ,

What is the LoRaWAN version are you using in TTN V3?

TTN V3 doesn’t seem to support RU864-870 in LoRaWAN v1.0.2 but only in LoRaWAN v1.1.

That can be a problem because RUI V2 of WisDuo modules like RAK811 is only compatible to LoRaWAN v1.0.2.