Hello
I am working on rak2270-sticker. I was searching for the bootloader for arduino. I found the one for rui.
Is the rak3172lp-sip not supported for arduino? If yes please give me the link for bootloader
Bilal
RUI3 is our Arduino Board Support Package for the RAK3172-SiP.
There is no other Arduino BSP from us.
If you want to use another Arduino BSP for STM32 MCU’s, we do not support it.
Thank you for your reply.
i am uploading RAK3172LP-SiP (.hex) from Rakk3172-sip also downloaded the official firmware from github. i have 2 devices one of them says activated, but the other one is saying inactivated.
22:50:35.451 ->
22:50:35.667 -> RAKwireless RAK3272LP-SiP
22:50:35.667 -> ------------------------------------------------------
22:50:35.667 -> Version: RUI_4.1.1_RAK3272LP-SiP
22:50:35.667 -> Current Work Mode: LoRaWAN.
22:51:52.096 ->
22:51:52.313 -> RAK2270 SW Version: RAK2270_1.1.0_Generic
22:51:52.824 -> FACTORY_MODE: ON(255)
22:51:52.824 -> Uplink period is 60 minutes
22:51:52.824 -> Battery Voltage: 3.31
22:51:53.096 -> NTC_Temp.: 32.15
22:51:53.096 -> ACT_CHECK: Inactivated(1)
22:51:53.134 -> Current Work Mode: LoRaWAN.
i can see the voltage on R16 is 1.8-2.0V after cutting the pcb.
please let me know what i am missing?
Bilal
okay thank you i will open a new thread on this.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.