Rak5860 don't show the answer to AT commands

Dear All,

I have a trouble, after 1 month of wait for get NB-IOT sim from Vodafone , i add the module to my WisBlock but when i try to run an example program with a list of AT commands, i dont’ see the answer . I off the Echo mode with ATE1 , but nothing . With Hologram sim it was showing the answer , but now it stop . How can i verify if i broke the module 5860 ?

09:52:34.375 -> RAK11200 Cellular TEST With V Sim Vodafone sim card!
09:52:58.201 -> BG77 power up!
09:52:58.201 -> ATZ0

09:52:58.250 -> 
09:53:00.239 -> A

09:53:00.239 -> 
09:53:02.234 -> AT&F

09:53:02.234 -> 
09:53:04.268 -> ATI

09:53:04.268 -> 
09:53:06.263 -> ATE0

09:53:06.263 -> 
09:53:08.253 -> AT+CPIN?

09:53:08.253 -> 
09:53:10.292 -> AT+QNWINFO

09:53:10.292 -> 
09:53:12.287 -> AT+CEREG=0

09:53:12.287 -> 
09:53:14.275 -> AT+QCSQ

09:53:14.324 -> 
09:53:16.309 -> AT+COPS=1,2,'22210'

09:53:16.309 -> 
09:53:18.299 -> AT+QCFG=“iotopmode”,1,1

09:53:18.348 -> 
09:53:20.338 -> AT+QICSGP=1,1,'nb.it.vodafone.iot',,,1=?

09:53:20.338 -> 
09:53:22.328 -> AT+QCFG=”nwscanseq”,030201

09:53:22.328 -> 
09:53:24.360 -> AT+QIACT=1

09:53:24.360 -> 
09:53:26.354 -> AT+QNWINFO

09:53:26.354 -> 
09:53:28.342 -> AT+QCSQ

09:53:28.389 -> 
09:53:30.368 -> AT+QHTTPCFG='contextid',1

09:53:30.368 -> 
09:53:32.390 -> AT+QICSGP=1,1, 'nb.it.vodafone.iot',,,1

09:53:32.390 -> 
09:53:34.410 -> AT+QIACT?

09:53:34.410 -> 
09:53:36.424 -> AT+QNWINFO

09:53:36.424 -> 
09:53:38.396 -> AT+QIOPEN=1,0,"TCP","industrial.ubidots.com","80"

09:53:38.442 -> 
09:53:40.399 -> POST /api/v1.6/devices/

09:53:40.444 -> 
09:53:42.452 -> Send test data to Ubidots via TCP!
09:53:42.452 -> AT+QHTTPCFG='contextid',1

09:53:42.452 -> 
09:53:42.452 -> AT+QHTTPCFG='responseheader',1

09:53:42.452 -> 
09:53:42.452 -> AT+QIACT?

09:53:42.452 -> 
09:53:42.452 -> AT+QICSGP=1,1,'  nb.it.vodafone.iot','','',1

09:53:42.452 -> 
09:53:42.452 -> AT+QIACT=1

09:53:42.499 -> 
09:53:42.499 -> AT+QIACT?

09:53:42.499 -> 
09:53:42.499 -> AT+QHTTPURL=23,80

09:53:42.499 -> 
09:53:42.499 -> CONNECT

 

I fix the problem , on the wisblock i had the RAK1910, i disconnected the module, and the Rak5860 back to work , is possible there is an hardware conflict ?

Both are using the same Serial port.
you can check problems with GPIOs with our Pin Mapper