RAK7249 WisGate Edge Max with Hologram Sim Card

Issue: How to setup gateway using Hologram SIM Card?

Setup: I filled out Cellular Interface section using gateway’s web page
APN as hologram

Is there anyone used Hologram Sim Card to send data to TTN?

@Jams - did you ever get this working? I am trying to configure a RAK7268 with a Hologram Sim Card and have been unable to find any instructions or documentation on the subject.

Wanted to come back to add on to this thread in case other folks also had issues

I was testing Hologram’s Dual Core SIMs with a 7289V2 gateway and experienced no issue in some geographical locations and others I could not get it to connect ever.

Turned out to be an issue with Verizon (and their annoying ODI process). The Cell Modem module is approved by Verizon but still has issues when installed into an end device. Hologram support was able to de-activate the Verzion SIM remotely and it instantly worked once it swapped to AT&T/T-Mobile

Following up from my June 2022 post, I was able to get a RAK7268 gateway working with a Hologram SIM card. In fact I’ve deployed several of these in the 2 years since my last post. I am on the US and using the TTN network.