Why is it that when I replace RAK7268V2 with RAK7289V2, RAK3172EVB still does not receive the beacon?
My Gateway is RAK7289V2 CN470, and my Network Server is built-in network server. The EndDevice is RAK3172 CN470.
I check the status again via AT+CLASS after 10 minutes of sending uplink packet. It still returns AT+CLASS=B:S3.

And I made sure the beacon was enabled. The setting of built-in network server is default.

In additional, I found that system log report “could not get gps time from gps”.

Where did you put the GPS? Is it outside with a free view to the sky, so that it can get a location fix?
No location fix ==> no GPX time.

Did you enable the GPS in the gateway settings?