Data transmission in LoRaP2P mode

LPWAN Nodes RAK7204
1

Issue: Sensor data is not transmitted in LoRaP2P mode

Setup: Set the RAK811 and RAK7204 to LoRaP2P mode. When sending 0x 12345678901234567890 message from RAK7204 using Serial Port Tool, RAK811 receive the message. Firmware and Bootloader use the latest version.

Server:

Details: It is set to transmit sensor data every 60 seconds through at+set_config=lora:send_interval:1:60 command, but RAK811 module does not receive sensor data.

2

RAK7204 sensor data is only sent periodically in lorawan mode, however, the sensor data transmission function is not supported in P2P mode.