It is not a problem for us. As much as possible we want to have our products open, so customers have as well the option to change things.
wow! This thought is fantastic!
Btw, is it how to enable the VERBOSE of the LoRaWAN join command ?
VERBOSE ???
What exactly do you mean?
hi,
these messages
315s533:MAC txDone
320s370:RX_1 on freq 926300000 Hz at DR 10
320s566:IRQ_RX_TX_TIMEOUT
320s566:MAC rxTimeOut
321s382:RX_2 on freq 923300000 Hz at DR 8
321s595:IRQ_RX_TX_TIMEOUT
321s595:MAC rxTimeOut
Never saw them.
My guesses
(1) enable Debug in Arduino Board to Level 1 or Level 2
(2) use AT+DEBUG=1
Thanks!
Using LA915 the debug show always 0 to frequency and rx1 frequency,but connects!
Maybe should be good fix it
@beegee
I have a rak3172 application that will need the stm32cube ide + la915
Did you test the la915 on stm32cube too, on rak3172 ?
If yes, can I use the endnode stm32cube example on rak3172 ? Need to change middleware ?
Thanks
LA915 was added to our RUI3, I do not know whether STM32Cube example supports it.
I do not know whether you have to change anything, I am not using STM32CubeIDE nor the STM32 SDK.
thanks!
Brazilian team. rak unconfirmed uplink is working on LA915 ?
For me, it´s only working using confirmed uplink.
With unconfirmed uplink, the data not reaches my EVERYNET, but with confirmed uplink, the data reachs the eveynet.
Someone having the same problem ?
On stm32cube to RAK3172 i got success on unconfirmed uplink and confirmed.
Hi @tcpipchip,
I am using unconfirmed uplinks only and it is working fine.
But, all via AT commands using a host controller.
Wow,
Sorry that you answered 2 months late.
Then I canceled to use rak sdk and I rebuild the stm32 sdk to port la915, version loramac 1.0.4
But, please, wich rak wireless at version firmware did you use ? And exactly wich sequence did you use ?
Did you try the everynet la915 certification software?