Hi there
I’ve recently purchased a RAK2013 Cellular WisLink Raspberry Pi-HAT BG96 for my Raspberry Pi 3 Model B+.
I’ve loaded the latest raspbian onto my device and ensured that I have updated any outstanding patches. Everything there seems be be working as it should.
The problem is that the pi is not detecting the WisLink at all. I can not see any reference to it at boot time. See the output from dmesg below. Any thoughts would be greatly appreciated
pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.42-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1219 SMP Tue May 14 21:20:58 BST 2019
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x37800000
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] Normal zone: 2016 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 229376 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
[ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=6a2e808d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 886304K/917504K available (8192K kernel code, 627K rwdata, 2164K rodata, 1024K init, 821K bss, 23008K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xb8800000 - 0xff800000 (1136 MB)
lowmem : 0x80000000 - 0xb8000000 ( 896 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 628 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 822 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26229 entries in 77 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000279] Console: colour dummy device 80x30
[ 0.000298] console [tty1] enabled
[ 0.000346] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=192000)
[ 0.000362] pid_max: default: 32768 minimum: 301
[ 0.000701] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000717] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001628] CPU: Testing write buffer coherency: ok
[ 0.002088] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002736] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002887] rcu: Hierarchical SRCU implementation.
[ 0.003680] smp: Bringing up secondary CPUs …
[ 0.004515] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005435] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006296] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006418] smp: Brought up 1 node, 4 CPUs
[ 0.006428] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006434] CPU: All CPU(s) started in HYP mode.
[ 0.006439] CPU: Virtualization extensions available.
[ 0.007405] devtmpfs: initialized
[ 0.019460] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.019699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019717] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.020351] pinctrl core: initialized pinctrl subsystem
[ 0.021225] NET: Registered protocol family 16
[ 0.024320] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.030181] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.030189] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.030397] Serial: AMBA PL011 UART driver
[ 0.032760] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.068268] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.069907] SCSI subsystem initialized
[ 0.070185] usbcore: registered new interface driver usbfs
[ 0.070240] usbcore: registered new interface driver hub
[ 0.070333] usbcore: registered new device driver usb
[ 0.090128] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48, variant start_x
[ 0.100368] raspberrypi-firmware soc:firmware: Firmware hash is 2e98b31d18547962e564bdf88e57b3df7085c29b
[ 0.111856] clocksource: Switched to clocksource arch_sys_counter
[ 0.200641] VFS: Disk quotas dquot_6.6.0
[ 0.200725] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.200944] FS-Cache: Loaded
[ 0.201157] CacheFiles: Loaded
[ 0.211105] NET: Registered protocol family 2
[ 0.211940] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.211978] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.212088] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.212274] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.212410] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.212460] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.212798] NET: Registered protocol family 1
[ 0.213389] RPC: Registered named UNIX socket transport module.
[ 0.213396] RPC: Registered udp transport module.
[ 0.213401] RPC: Registered tcp transport module.
[ 0.213407] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.215165] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.218215] Initialise system trusted keyrings
[ 0.218402] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.228177] FS-Cache: Netfs ‘nfs’ registered for caching
[ 0.228750] NFS: Registering the id_resolver key type
[ 0.228777] Key type id_resolver registered
[ 0.228782] Key type id_legacy registered
[ 0.228799] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.231079] Key type asymmetric registered
[ 0.231088] Asymmetric key parser ‘x509’ registered
[ 0.231135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.231300] io scheduler noop registered
[ 0.231308] io scheduler deadline registered (default)
[ 0.231480] io scheduler cfq registered
[ 0.231488] io scheduler mq-deadline registered (default)
[ 0.231495] io scheduler kyber registered
[ 0.234234] BCM2708FB: allocated DMA memory 0xf7900000
[ 0.234278] BCM2708FB: allocated DMA channel 0
[ 0.284646] Console: switching to colour frame buffer device 228x61
[ 0.314203] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.315838] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.316019] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.316545] vc-sm: Videocore shared memory driver
[ 0.316869] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.327910] brd: module loaded
[ 0.338474] loop: module loaded
[ 0.338489] Loading iSCSI transport class v2.0-870.
[ 0.339287] libphy: Fixed MDIO Bus: probed
[ 0.339404] usbcore: registered new interface driver lan78xx
[ 0.339462] usbcore: registered new interface driver smsc95xx
[ 0.339479] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.367401] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.567663] Core Release: 2.80a
[ 0.567673] Setting default values for core params
[ 0.567708] Finished setting default values for core params
[ 0.767994] Using Buffer DMA mode
[ 0.768001] Periodic Transfer Interrupt Enhancement - disabled
[ 0.768007] Multiprocessor Interrupt Enhancement - disabled
[ 0.768014] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.768034] Dedicated Tx FIFOs mode
[ 0.768548] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = b7914000 dma = 0xf7914000 len=9024
[ 0.768575] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.768584] dwc_otg: Microframe scheduler enabled
[ 0.768642] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.768653] WARN::hcd_init_fiq:458: FIQ ASM at 8064b6dc length 36
[ 0.768665] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[ 0.768727] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.768762] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.768797] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.768848] Init: Port Power? op_state=1
[ 0.768853] Init: Power Port (0)
[ 0.769118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.769130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.769139] usb usb1: Product: DWC OTG Controller
[ 0.769148] usb usb1: Manufacturer: Linux 4.19.42-v7+ dwc_otg_hcd
[ 0.769157] usb usb1: SerialNumber: 3f980000.usb
[ 0.769805] hub 1-0:1.0: USB hub found
[ 0.769851] hub 1-0:1.0: 1 port detected
[ 0.770450] dwc_otg: FIQ enabled
[ 0.770456] dwc_otg: NAK holdoff enabled
[ 0.770462] dwc_otg: FIQ split-transaction FSM enabled
[ 0.770473] Module dwc_common_port init
[ 0.770765] usbcore: registered new interface driver usb-storage
[ 0.770946] mousedev: PS/2 mouse device common for all mice
[ 0.771893] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.772212] bcm2835-cpufreq: min=600000 max=1400000
[ 0.772694] sdhci: Secure Digital Host Controller Interface driver
[ 0.772700] sdhci: Copyright© Pierre Ossman
[ 0.773090] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.773492] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.773608] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.775179] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.775329] hidraw: raw HID events driver © Jiri Kosina
[ 0.775528] usbcore: registered new interface driver usbhid
[ 0.775533] usbhid: USB HID core driver
[ 0.776342] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.777998] [vc_sm_connected_init]: start
[ 0.788870] [vc_sm_connected_init]: end - returning 0
[ 0.789935] Initializing XFRM netlink socket
[ 0.789962] NET: Registered protocol family 17
[ 0.790071] Key type dns_resolver registered
[ 0.790658] Registering SWP/SWPB emulation handler
[ 0.791300] registered taskstats version 1
[ 0.791316] Loading compiled-in X.509 certificates
[ 0.798688] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.798778] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.800413] console [ttyS0] disabled
[ 0.800447] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 31250000) is a 16550
[ 0.800497] console [ttyS0] enabled
[ 0.801537] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.801546] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.827857] sdhost: log_buf @ (ptrval) (f7913000)
[ 0.864256] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.865821] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.867384] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.870183] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.876421] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.877808] of_cfs_init
[ 0.877979] of_cfs_init: OK
[ 0.878657] Waiting for root device PARTUUID=6a2e808d-02…
[ 0.944408] random: fast init done
[ 0.951680] mmc1: new high speed SDIO card at address 0001
[ 0.965141] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.969038] mmc0: new high speed SDXC card at address aaaa
[ 0.970235] mmcblk0: mmc0:aaaa SC256 238 GiB
[ 0.973618] mmcblk0: p1 p2
[ 0.982004] Indeed it is in host mode hprt0 = 00021501
[ 1.022338] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.022409] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.032737] devtmpfs: mounted
[ 1.043908] Freeing unused kernel memory: 1024K
[ 1.062273] Run /sbin/init as init process
[ 1.191918] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.192061] Indeed it is in host mode hprt0 = 00001101
[ 1.432216] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.432231] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.432896] hub 1-1:1.0: USB hub found
[ 1.432986] hub 1-1:1.0: 4 ports detected
[ 1.455881] systemd[1]: System time before build time, advancing clock.
[ 1.604516] NET: Registered protocol family 10
[ 1.605886] Segment Routing with IPv6
[ 1.643919] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.646559] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.652668] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.653290] systemd[1]: Detected architecture arm.
[ 1.656411] systemd[1]: Set hostname to .
[ 1.729106] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[ 1.751949] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.882339] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.882357] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.883020] hub 1-1.1:1.0: USB hub found
[ 1.883108] hub 1-1.1:1.0: 3 ports detected
[ 1.981910] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 2.116896] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=54.00
[ 2.116911] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.116922] usb 1-1.3: Product: USB Optical Mouse
[ 2.116931] usb 1-1.3: Manufacturer: Logitech
[ 2.122903] input: Logitech USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C05A.0001/input/input0
[ 2.123354] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-3f980000.usb-1.3/input0
[ 2.176434] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.177647] systemd[1]: Created slice System Slice.
[ 2.180812] systemd[1]: Mounting RPC Pipe File System…
[ 2.186065] systemd[1]: Mounting POSIX Message Queue File System…
[ 2.186634] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.187366] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.187727] systemd[1]: Listening on udev Kernel Socket.
[ 2.211962] usb 1-1.1.2: new low-speed USB device number 5 using dwc_otg
[ 2.341773] i2c /dev entries driver
[ 2.371254] usb 1-1.1.2: New USB device found, idVendor=045e, idProduct=0750, bcdDevice= 1.10
[ 2.371278] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.371288] usb 1-1.1.2: Product: Wired Keyboard 600
[ 2.371297] usb 1-1.1.2: Manufacturer: Microsoft
[ 2.691929] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg
[ 2.822429] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 2.822448] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.941113] input: Microsoft Wired Keyboard 600 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:045E:0750.0002/input/input1
[ 3.004952] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-3f980000.usb-1.1.2/input0
[ 3.007868] input: Microsoft Wired Keyboard 600 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:045E:0750.0003/input/input2
[ 3.073032] microsoft 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-3f980000.usb-1.1.2/input1
[ 3.088396] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 3.089450] libphy: lan78xx-mdiobus: probed
[ 3.104851] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 3.449673] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.518519] systemd-journald[110]: Received request to flush runtime journal from PID 1
[ 3.899372] Driver for 1-wire Dallas network protocol.
[ 3.908955] gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 3.940507] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.951288] media: Linux media interface: v0.10
[ 3.953468] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 3.953490] [vc_sm_connected_init]: start
[ 3.954884] [vc_sm_connected_init]: installed successfully
[ 3.988389] videodev: Linux video capture interface: v2.00
[ 4.022587] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.032630] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.056193] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.069061] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 4.069080] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 4.101555] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 4.101576] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 4.216115] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.266183] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.293088] bcm2835_audio soc:audio: card created with 8 channels
[ 4.378324] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 4.472761] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.483787] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.484697] usbcore: registered new interface driver brcmfmac
[ 4.722294] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 4.722331] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 4.736069] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.759048] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 4.777979] random: crng init done
[ 4.777997] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.812681] bcm2835-v4l2: scene mode selected 0, was 0
[ 4.813324] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720
[ 4.818950] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[ 5.531257] uart-pl011 3f201000.serial: no DMA platform data
[ 6.013056] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.013093] brcmfmac: power management disabled
[ 6.400532] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.789097] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 10.312019] Under-voltage detected! (0x00050005)
[ 11.396732] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.931344] Bluetooth: Core ver 2.22
[ 11.931450] NET: Registered protocol family 31
[ 11.931457] Bluetooth: HCI device and connection manager initialized
[ 11.931482] Bluetooth: HCI socket layer initialized
[ 11.931495] Bluetooth: L2CAP socket layer initialized
[ 11.931540] Bluetooth: SCO socket layer initialized
[ 11.955906] Bluetooth: HCI UART driver ver 2.3
[ 11.955924] Bluetooth: HCI UART protocol H4 registered
[ 11.956020] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 11.956256] Bluetooth: HCI UART protocol Broadcom registered
[ 12.276831] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.276846] Bluetooth: BNEP filters: protocol multicast
[ 12.276869] Bluetooth: BNEP socket layer initialized
[ 12.365860] Bluetooth: RFCOMM TTY layer initialized
[ 12.365894] Bluetooth: RFCOMM socket layer initialized
[ 12.365937] Bluetooth: RFCOMM ver 1.11
[ 14.241116] fuse init (API version 7.27)
[ 20.712060] Voltage normalised (0x00000000)
[ 41.512208] Under-voltage detected! (0x00050005)
[ 45.672025] Voltage normalised (0x00000000)
[ 47.752169] Under-voltage detected! (0x00050005)
[ 72.712479] Voltage normalised (0x00000000)
[ 1077.355194] rpi_firmware_get_throttled: 4 callbacks suppressed
[ 1077.355202] Under-voltage detected! (0x00050005)
[ 1081.515208] rpi_firmware_get_throttled: 4 callbacks suppressed
[ 1081.515215] Voltage normalised (0x00000000)
[ 1643.115865] Under-voltage detected! (0x00050005)
[ 1653.515886] Voltage normalised (0x00000000)
Some error in one of files. Please delete the cloned repo. Clone and install again.