Unable to install firmware after boot update. Timeout [SOLVED]

Issue:Firmware upgrade timeouts

Setup:Windows 10, Rak Firmware Upgrade Tool, RAK7204 Bootloader 3.0.2


Details:After succesfully upgrading RAK7204 to bootloader 3.0.2 it enters in boot mode, but when trying to install the firmware update tool throws timeout and firmware update becomes impossible.

Hi @inakietxebarria,
Could you please make sure that after uploading the bootloader, you have removed the jumper between the BOOT pin and the VDD pin?

Hi @Nikola!

Yes, it is removed.

After removing the jumper press the reset button and also try to flash it with this tool.

Using this new tool fixed the issue. Thanks a lot for your help, the firmware is upgraded.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.